feature:
1. The light model changes each time the button is pressed, and it loops to the beginning.
2. After the sensor is detected, the light will illuminate within 10 seconds. During the lighting time, if motion is detected again, counting continues for 10 seconds.
3. When there is no light, the solar panel will turn off. The button button is invalid, and the solar cell 4. board circuit works only when there is no light.
Function switch
1. Press for 3 seconds to open.
2. The first mode: motion sensor + dim light. Keep the soft light at night and the light will be strong when people pass by.
3. Press again to switch to body sensing mode: people pass the glare and turn off after 10 seconds.
4. Press the switch again: the night light will turn on automatically and automatically turn off after 5 hours.
5. Press again and then close.
Precautions:
- Initial setting: Put the product in the sun, charge it for a few hours, then install it.
- Remove the battery when not using the product for a long time.
- To ensure that the battery does not lose power and cause damage, please charge the solar panel light at least once a month.
- When the indicator is flashing, it indicates that the battery is low and you need to charge the battery before you can use it.
- Please install in direct sunlight to ensure that the day's sunshine time exceeds six hours, otherwise it may not be fully charged in rainy days.
0.350
Package weight: 0.393 kg
Product size (L x W x H): 18.00 x 10.95 x 2.90 cm / 7.09 x 4.31 x 1.14 inches
Package size (L x W x H): 20.00 x 14.00 x 5.00 cm / 7.87 x 5.51 x 1.97 inches
Package Contents: 1 x LED Solar Light, 1 x Mounting Kit, 1 x User Manual (English)
