Square Mirror Multi-function LED Alarm Clock - White - 5D25627112

Material: LED mirror and plastic
Function Description
1. LED time display
2.12 / 24 hour turn
3. Alarm clock / snooze
4. Temperature display ( degree Celsius Deg.C )
5. Temperature range: 0 Deg.C - 50 Deg.C
6. Night mode setting ( 18:00 - 06:00 )
7. Mirror function
8. Time and temperature switch display
9. 2 brightness level
10. Five function buttons ( MODE, ALARM, SNZ / LIGHT, UP, DOWN )
11. Time memory function ( 3 x AAA battery for time memory )
12. Power consumption: 3 AAA batteries ( not included ) USB charging cable ( included )
13. When the battery is charged or powered by the USB cable, a BI sound is emitted and the LED lights up.
14. When the battery is charging, press the SNZ / LIGHT button and the LED will illuminate for 5 seconds.
15. When using a USB cable, the LED will always light up.
Function buttons:
Press the MODE button switch to display : Time - Temperature - Night mode ON / OFF
Bay Press the UP button to switch the light to level 2.
In time mode, press ALARM to activate/deactivate the alarm function.
Time setting:
a. In time mode, press and hold the MODE button to enter the time setting mode. Setting order: hour - minute - 12HR / 24HR
b. During the setup process, the setup article will pop up.
c. Press UP UP once; hold down for 2 seconds and advance at 8 steps / second.
d. Press DOWN once; press 2 seconds to return at 8 steps / second.
e. If the 12HR format is selected, the PM display will be displayed in the afternoon, but no AM will display the morning time.
f. Press the MODE button or confirm the setting without any operation for 10 seconds and return to the normal display.
Alarm system:
a. In the time mode, press and hold the alarm button, the AL icon and the hour will flick, then enter the alarm time setting mode, the order is: hour - minute - snoring time ( 5 - 60 minutes )
b. During the setup process, the settings article will pop up
c. Press UP once; hold down for 2 seconds and advance at 8 steps / second.
d. Press DOWN once; hold down for 2 seconds and return at 8 steps / second.
e. The AL icon will flash during the setup process.
F. Press the alarm button or no operation to confirm the setting within 10 seconds and return to the normal display.
G. When an alarm occurs, press any key to stop the alarm.
When alarming:
a.Buzzer 1 minute (BIBIBIBI)
b. Press the SNZ / LIGHT button to stop the alarm and active snooze function, the AL icon will flash until the next alarm time is reached.
c. Press the MODE, ALARM, UP and DOWN buttons to stop the alarm. If the AL icon appears, it will alarm at the same time the next day. Press ALARM, AL will disappear and the alarm function will be turned off.
Snoozing function:
a. The interval between snoring is 5 minutes.
b. In the alarm mode, press and hold the ALARM button to set the alarm. Press ALARM 3 times to enter the sleep interval setting interface. 05 Tap, press the UP or DOWN button to set the interval to 5-60 minutes.
c. Press UP UP once; hold down for 2 seconds and advance at 8 steps / second.
d. Press DOWN once; hold down for 2 seconds and return at 8 steps / second.
e. When an alarm occurs, pressing the SNZ / LIGHT button will stop the alarm and active snooze function, and the AL icon will flash until the next alarm time is reached.
f. Only the battery is charged. Press the SNZ / LIGHT button and the LED will light for 5 seconds.
Night mode function:
a. Night mode means that the LED display will automatically adjust the brightness at night.
b. In the time interface, press the MODE button twice to enter the night mode interface. Press the UP or DOWN button to turn the night mode function on or off.
c. Night mode time is 18:00 to 6:00
d. Night mode function In the ON mode, press and hold the MODE button to enter the night mode setting. Setting order: start hour - start minute - stop hour - stop minute
Brightness level setting:
a. Two brightness levels
b. The default value is bright
c. Press the UP button to switch to a dim level.
Temperature display:
a. In time mode, press the MODE button to display the temperature. Press the down button to toggle the temperature between Deg.C units.
b. In temperature mode, hold down the MODE button until you hear a BI sound. The LED will switch display: temperature ( 5 seconds ) - time ( 10 seconds ) - repeat.
c. Press and hold the MODE button again until you hear the BI sound, it will return to the time mode.