FanJu FJ3373 Digital Weather Station Alarm Clock with Temperature Humidity - Goldenrod - 3975699712

1. Product Functions

Color Weather Forecast with Manually Time Setting
Indoor and Outdoor Thermometer and Hygrometer
MAX/MIN Temperature and Humidity Memory
Barometric Pressure and Temperature Alert
Indoor and Outdoor Temperature, Humidity and Air Pressure Trend
Daily Alarm, Snooze Function, Calendar and Moon Phase
4 Levels Backlight Switch: High, Low, Off with USB power cable

2. Weather Forecast Function
This weather forecast displays the 7 following color icons: sunny, slightly cloudy, cloudy, rainy, heavy rainy, snowy and heavy snowy.
The weather symbols indicate the weather fluctuation over the next eight hours and not the current weather.

3. Temperature, Humidity and Barometric Pressure
The weather station automatically starts receiving transmission from outdoor sensor (maybe take 3 minutes) after batteries inserted or USB adapter plug in. Also can press the TX button inside the outdoor sensor to make connect more quickly.
Temperature alternative in F or C.
Indoor temperature measurement ranges: 14 F to 122 F.
Outdoor temperature measurement ranges: -13 F to 122 F.
Indoor and Outdoor humidity measurement ranges: 20 percent RH to 95 percent RH.
The ice alert symbol appears and alarm sounds when the outdoor temperature at 30 F to 37 F.
Maximum and Minimum value record of temperature and humidity.
Time, Date, Alarm Clock, Snooze, Moon Phase and Backlight
Calendar up to 2099
One easy set daily alarm with snooze function. When the alarm is ring, presses any button except the SNOOZE LIGHT button to stop the alarm clock. If touch SNOOZE LIGHT button, the alarm mode will get to SNOOZE mode. The alarm signal will sounds again after 5 minute.
Moon phase automatically display on the LCD.
When USB power cable plugged in, backlight will keep lighting and press SNOOZE button to select 4 levels backlights. If use battery only, backlight will only keep lighting 15 seconds by press the SNOOZE button

4. Wireless Outdoor Sensor
Wall Mount or Table Stand.
433.92 MHz RF transmitting frequency.
Up to 200 feet transmission range in an open area

5. Power Supply
Weather station: 2 x AA batteries (NO Included) or POWER adapter (Included).
Wireless outdoor sensor: 2 x AA (NO Included)

6. Notes for Customers:
When station start to receive the wwvb signal, the backlight will not keep lighting even adapter plugged in. And all buttons except + will not working during wwvb receiving model. You can press + button to stop searching radio signal, and then all buttons functions again.
If outdoor data do not display or incorrect. Please press - button 3 seconds to reset the data and click the TX button inside the outdoor sensor to reconnection.
Backlight will keep lighting with power adapter. If weather station run with battery only, backlight only active for 15 second by press the SNOOZE LIGHT button, it may a little hard to see the display without backlight.